BOSS DN-2 Dyna Drive comes with dimensions of (W) 73 mm x (H) 59 mm x (D) 129 mm and weight 0.4 kg. Equipped with several controls such as pedal switch, LEVEL Knob, TONE knob, and DRIVE knob, this compact pedal also enriched with INPUT jack, OUTPUT jack, and AC Adaptor jack (DC 9 V).
BOSS DN-2 Dyna Drive Owner’s Manual recommends that you read carefully the sections entitled “USING THE UNIT SAFELY” and “IMPORTANT NOTES”. These sections provide important information concerning the proper operation of the unit. Additionally, BOSS DN-2 Dyna Drive Owner’s Manual also provides important information such as changing the battery, panel descriptions, operating the unit, connections to troubleshooting is useful, both for users and technicians.
BOSS DN-2 Dyna Drive Product Specification
| Nominal Input Level | -20 dBu | |
 | ||
| Input Impedance | 1 M ohm | |
| | ||
| Nominal Output Level | -20 dBu | |
| | ||
| Output Impedance | 1 k ohm | |
| | ||
| Recommended Load Impedance | 10 k ohms or greater | |
| | ||
| Controls | Pedal switch, LEVEL knob, TONE knob, DRIVE knob | |
| | ||
| Indicator | CHECK indicator (Serves also as battery check indicator) | |
| | ||
| Connectors | INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V) | |
| | ||
| Power Supply | DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional) | |
| | ||
| Current Draw | 36 mA (DC 9 V) | |
| | ||
| Expected battery life under continuous use | Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use. | |
| | ||
| Accessories | Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), Dry Battery 006P/9V (6LR61) | |
| | ||
| Options | AC Adaptor (PSA series) | |
| Size and Weight | ||
| Width | 73 mm | 2-7/8 inches |
| | ||
| Depth | 129 mm | 5-1/8 inches |
| | ||
| Height | 59 mm | 2-3/8 inches |
| | ||
| Weight | 0.4 kg | 1 lbs. |
| | ||
| * 0 dBu = 0.775 Vrms* The battery that is supplied with the unit is for temporary use, intended primarily for testing the unit's operation.* We recommend that alkaline battery be used when replacing the battery. | ||
| * The specifications are subject to change without notice. | ||
If you are looking for BOSS DN-2 Dyna Drive Owner’s Manual, please download it from their official website that the link is below.
All information presented on this blog follow the contents from the official website or other websites (if not available on the official website) or pdf obtained at the time the information is uploaded to this blog. In this paper, there may be typographical errors. Therefore, you still have to refer to the information or specifications contained in the official website.
usermanualandspecification.blogspot.com not responsible for any changes that occur in the information contained in this user guide or specification.
usermanualandspecification.blogspot.com not received any complaints and free from any claims of any party upon the information contained in this blog.
Activity writes and uploads the information and all sources of information and links in this blog is a personal activity and hobbies. If you are the site owner or legally responsible for the information and links in this blog, please write an email to raicon.mayday at gmail.com subjected "Please Remove Links from usermanualandspecification.blogspot.com".
