7/13/2011

Isi kodenya disini

BOSS BR-1180/BR-1180CD Owner’s Manual and Product Specification

Taken from Introduction at BOSS BR-1180/BR-1180CD Owner’s Manual:

Simple operation
The BR-1180/1180CD is designed to be operated as easily as a cassette tape recorder, even by beginners. Additionally, the large liquid crystal display allows you to view and confirm various information in graphic format. Whether you are simply preparing a demo tape, or are getting ready to go to master with your first album, the simple operation of the BR-1180/1180CD allows you to create digital recordings the very day you take it out of the box.

Digital audio workstation

All processes are fully digital
In addition to a digital mixer and digital hard disk recorder, the BR-1180/1180CD also features two internal digital effects systems.

By connecting a DAT recorder, MD recorder, or other digital recorder to the DIGITAL OUT jacks, you can perform all the steps needed for professional-level music recording, including editing, bouncing tracks, applying effects, and mixing down, entirely within the digital realm, so there is no degradation in the signal quality.

Handles uncompressed recording and playback
The BR-1180/1180CD handles linear 16-bit uncompressed recording and playback, allowing you to record with the same sound quality as the original, with no deterioration in the sound.

Of course, when you want to be economical with your recording time, yet maintain sound quality, you can still record and play back using conventional compression techniques.

Equipped with V-Tracks
The BR-1180/1180CD includes a total of ten recording tracks, allowing you to record and play back eight independent tracks with two-track stereo recording and playback, making it possible to get simultaneous two-track recording or simultaneous ten-track playback.Moreover, each track incorporates eight virtual tracks, called “V-Tracks,” for a total recording capability of 10 x 8 = 80 tracks!
This increased versatility allows you to do things such as record numerous takes of a guitar solo, which you can later choose from when putting it all together.

Two versatile digital effects processors
The BR-1180/1180CD contains two types of effect unit. One type is for recording (insert effect) and the other type is independent send/return effects (loop effect). These two types can be used simultaneously. This means that the BR-1180/1180CD is all you need to produce a sophisticated song without using external effect devices.

The BR-1180/1180CD has many built-in simulations and effects, including amp simulation with COSM for a wide variety of insert effects.

You also get a wide variety of effects, including everything from the guitar effects you would expect, to vocal and keyboard multi-effects and mic simulators.

The loop effects include spatial effects such as chorus, delay and reverb, which are vital for proper stereo mixdown.

By using the insert effects and loop effects together, you can add both sound and spatial effects to your music at one time.

Editing Functions
With the BR-1180/1180CD, you can perform editing operations such as copying, moving, and erasing, previously unheard of with multitrack recorders that use tapes.

For example, you can have just a four-measure drum pattern repeated any number of times you want for use with break beat music, and have the same chorus inserted both at the beginning and end of a song.

Non-destructive editing
Since this is hard disk recording, you can perform nondestructive editing.With non-destructive editing, after performing any editing and recording operations, you can still return your data to its previous state (undo and redo functions).

Actually, the features written in the Owner's Manual BOSS BR-1180/BR-1180CD much. However, some of the features presented above, seems to have fairly represent what a great BOSS BR-1180/BR-1180CD.

BOSS BR-1180/BR-1180CD Product Specification

Tracks
Track: 10 V-Track: 80 (8 V-Tracks per each Track)
(Up to 2 tracks can be recorded simultaneously, and up to 10 tracks can be played back simultaneously.)
http://www.bosscorp.co.jp/products/en/images/trans.gif
Maximum Useful Capacity/Recording Time
Internal Hard Disk: 20 Gbytes
(Data type: Recording time)
LIN: 60 hours
MT1: 120 hours
MT2: 160 hours
LV1: 190 hours
LV2: 240 hours
(conversion in 1 track, times approximate)*1*2
http://www.bosscorp.co.jp/products/en/images/trans.gif
Signal Processing
AD Conversion: [24 bit AF Method*3 (Guitar/Bass)], [24 bit AF-AD (Mic)], [24 bit (Line)], [24 bit (Simul)]
DA Conversion: 24 bit
Internal Processing: 24 bit (digital mixer section)
Recording Data: 16 bit linear (data type: LIN)
http://www.bosscorp.co.jp/products/en/images/trans.gif
Sample Rate
44.1 kHz
http://www.bosscorp.co.jp/products/en/images/trans.gif
Frequency Response
20Hz to 20kHz (+1/-3dB)
http://www.bosscorp.co.jp/products/en/images/trans.gif
Total Distortion
0.15 % or less (INPUT SENS: CENTER, 1 kHz at nominal output level, data type: LIN)
http://www.bosscorp.co.jp/products/en/images/trans.gif
Nominal Input Level (Variable)
GUITAR/BASS jack: -10 dBu, MIC 1, 2 jack: -40 dBu, LINE jack: -10 dBu
http://www.bosscorp.co.jp/products/en/images/trans.gif
Input Impedance
GUITAR/BASS jack: 1M ohms
MIC 1, 2 jack (TRS): 2.2 k ohms (HOT-COLD), 1.1 k ohms (HOT-GND, COLD-GND)
MIC 1, 2 jack (XLR): 2.2 k ohms (HOT-COLD), 1.1 k ohms (HOT-GND, COLD-GND)
LINE IN jack: 50 k ohms
http://www.bosscorp.co.jp/products/en/images/trans.gif
Nominal Output Level
LINE OUT jack: -10 dBu
http://www.bosscorp.co.jp/products/en/images/trans.gif
Output Impedance
LINE OUT jack: 2 k ohms, PHONES jack: 100 ohms
http://www.bosscorp.co.jp/products/en/images/trans.gif
Recommended Load Impedance
LINE OUT jack: 20 k ohms or greater, PHONES jack: 8 to 50 ohms
http://www.bosscorp.co.jp/products/en/images/trans.gif
Residual Noise Level
LINE OUT jack: -87 dBu or less
(INPUT SELECT: GUITAR/BASS, input terminated with 1 k ohms, INPUT SENS: CENTER, IHF-A, typ.)
http://www.bosscorp.co.jp/products/en/images/trans.gif
Effects
Mixer Effects: [Loop Effects: Chorus/Delay/Doubling, Reverb], [EQ (Two-band equalizer. Independent for each track.)]
Insert Effects: 17 algorithms
Speaker Modeling (Reference model are the Roland DS-90/90A and DS-50A)
Mastering Effects
http://www.bosscorp.co.jp/products/en/images/trans.gif
Rhythm/Loop Phrase
Resolution: 96 TPQN
Rhythm Patterns: [Preset: 50, User*: 999, Song*: 999 (* User-programmable and SMF-importable)], Rhythm Arranges: [Preset: 50, User*: 10, Song*: 10 *User-programmable]
Loop Phrases: [User: 400 (50 x 8 banks), Song: 50] (.WAV/AIFF-importable)
http://www.bosscorp.co.jp/products/en/images/trans.gif
Display
64 x 40mm (Backlit LCD)
http://www.bosscorp.co.jp/products/en/images/trans.gif
Power Supply
DC 12 V; Supply AC Adaptor (Roland PSB-3U)
http://www.bosscorp.co.jp/products/en/images/trans.gif
Power Consumption
3A
http://www.bosscorp.co.jp/products/en/images/trans.gif
Accessories
AC Adaptor: PSB-3U
Effect Patch List/Rhythm Pattern List
DISCRETE DRUMS (CD-ROM; BR-1180CD only)
http://www.bosscorp.co.jp/products/en/images/trans.gif
Options
Expression Pedal (EV-5)
Foot Switch (FS-5U)
Pedal Switch (DP-2)
Size and Weight
Width
460 mm
18-1/8 inches
http://www.bosscorp.co.jp/images/trans.gif
Depth
273 mm
10-3/4 inches
http://www.bosscorp.co.jp/images/trans.gif
Height
87 mm
3-7/16 inches
http://www.bosscorp.co.jp/images/trans.gif
Weight
3.5 kg
7 lbs. 12 oz.
http://www.bosscorp.co.jp/products/en/images/trans.gif
* 0dBu = 0.775V rms *1 The recording times shown are approximate. Times may vary depending on the number of songs and the size of imported loop phrases. *2 Recording times shown are the total for all tracks used. Therefore, if each of the ten tracks contain an equal amount of data, the length of the resulting song will be approximately 1/10 of the time shown.*3 AF Method (Adaptive Focus method): This is a proprietary method from Roland that vastly improves the signal-to-noise (S/N) ratio of the A/D and D/A converters.
* The specifications are subject to change without notice.

If you are looking for BOSS BR-1180/BR-1180CD Owner’s Manual, please download it from their official website that the link is below.


All information presented on this blog follow the contents from the official website or other websites (if not available on the official website) or pdf obtained at the time the information is uploaded to this blog. In this paper, there may be typographical errors. Therefore, you still have to refer to the information or specifications contained in the official website.

usermanualandspecification.blogspot.com not responsible for any changes that occur in the information contained in this user guide or specification.

usermanualandspecification.blogspot.com not received any complaints and free from any claims of any party upon the information contained in this blog.

Activity writes and uploads the information and all sources of information and links in this blog is a personal activity and hobbies. If you are the site owner or legally responsible for the information and links in this blog, please write an email to raicon.mayday at gmail.com subjected "Please Remove Links from usermanualandspecification.blogspot.com".