Philips HTR9900 HD AV Receiver System User Manual states that Philips HTR9900 HD AV Receiver System comes with AM loop antenna, FM antenna cable, AC power cord (detachable for receiver’s power cord), remote control with 2 AA batteries, microphone (for automatic calibration of speaker system), speakers with full range satellite, and subwoofer with Bass Reflex System. This subwoofer has dimensions (W) 336 x (H) 4245 x (D) 366 mm and weighs 127 kg.
Activity writes and uploads the information and all sources of information and links in this blog is a personal activity and hobbies. If you are the site owner or legally responsible for the information and links in this blog, please write an email to raicon.mayday at gmail.com subjected "Please Remove Links from usermanualandspecification.blogspot.com".
Before using a Philips HTR9900 HD AV Receiver System, you are strongly advised to read and understand the contents inside Philips HTR9900 HD AV Receiver System user manual in order for this HD AV Receiver System to function properly. You should know that this unit does not support Philips EasyLink.
Philips HTR9900 HD AV Receiver System Product Specification
ACCESSORIES SUPPLIED
1 AM loop antenna
• 1 FM antenna cable
• 1 AC power cord (detachable for receiver's power cord)
• 1 remote control with 2 AA batteries
• 1 microphone (for automatic calibration of speaker system)
• Speakers and subwoofer (for HTR9900 only)
• Quick Start Guide
AMPLIFIER
Power output (ref. 0.08 % THD, 8 Ω):
• Stereo mode: 2 x 115 W
• Surround mode: 7 x 60 W
• Total harmonic distortion at rated power: 0.08 %
• IM distortion at rated power: 0.08 %
• Damping factor, 8 Ω: > 60
• Input sensitivity and impedance: 300 mV/47 kΩ
• Frequency response: ±0.5 dB (ref. 20Hz - 20 kHz)
• Signal/noise ratio, A-weighted:
• > 100 dB (ref. rated power 8Ω)
• > 90 dB (ref. 1W 8Ω)
• Trigger out DC voltage: 12V / 150mA
TUNER (AM BAND)
Tuning range: 522 kHz - 1620 kHz
Usable sensitivity: 60 dBu
• Signal/noise ratio: 40 dB
• Total Harmonic Distortion: 1.5 %
TUNER (FM BAND)
Tuning range: 87.5 MHz – 108 MHz
• Usable sensitivity, Mono: 10 dBμ
• Signal/noise ratio, Mono: 70 dB
• Signal/noise ratio, Stereo: 65 dB
• Total Harmonic Distortion, Mono: 0.3 %
• Total Harmonic Distortion, Stereo: 0.5 %
• Channel Separation: 40 dB°
• RDS decode sensitivity: 0.2 %
MAIN UNIT
Unit Dimensions (W x H x D): 435 x 167 x 394mm
• Net Weight: 13.3 kg
• Shipping Weight: 16.2 kg
• Standby power consumption: <1.8W
POWER (SUBWOOFER)
Power supply: 220~240 V, 50 Hz
• Power consumption: 200 W
• System: Bass Refl ex System
• Impedance: 4 ohm
• Speaker drivers: 165 mm (8”) woofer
• Frequency response: 50 Hz - 160 Hz (Adjustable)
• Dimensions (WxHxD): 336 x 424.5 x 366 (mm)
• Weight: 12.7 kg
SPEAKERS
System: full range satellite
• Speaker impedance: 8 ohm
• Speaker drivers:
• Centre: 2 x 4” woofer + 1x 1” tweeter
• Front: 2x 4” woofer + 1x 1.5” tweeter
• Surround: 2x 4” woofer + 1x 1.5” tweeter
• Surround Back: 2x 4” woofer + 1x 1.5” tweeter
• Frequency response: 70 Hz - 20 kHz
• Dimensions (WxHxD):
• Centre: 435.4 x 103.8 x 95.4 (mm)
• Front/Surround: 275 x 1117.8 x 288 (mm)
• Surround back: 275 x 1117.8 x 288 (mm)
• Weight:
• Centre: 1.54 kg
• Front/Surround: 7.14 kg
• Surround back: 6.32 kg
If you are looking for Philips HTR9900 HD AV Receiver System User Manual, please download it from their official website that the link is below.
All information presented on this blog follow the contents from the official website or other websites (if not available on the official website) or pdf obtained at the time the information is uploaded to this blog. In this paper, there may be typographical errors. Therefore, you still have to refer to the information or specifications contained in the official website.
usermanualandspecification.blogspot.com not responsible for any changes that occur in the information contained in this user guide or specification.
usermanualandspecification.blogspot.com not received any complaints and free from any claims of any party upon the information contained in this blog.
