Onkyo TX-NR1009 is the world's first receiver equipped with DTS Neo: X (9.2 channels) the which adds extra dimensions to surround. In addition, this receiver is also supported by HDMI for 3D Video and Audio Return Channel. By having Onkyo TX-NR1009 AV Receiver, you will get a special package of features, including diantaranya High-Quality HQV Vida VHD1900 Video processor, Marvel Qdeo Video Chip, Imaging Science Foundation, Network capability Delivers Internet Radio and Network Streaming, THX Select2 Plus, Direct Digital Connection of iPod/iPhone via Front Panel USB port, Audyssey MultEQ XT Advanced Room-correction and Speaker Calibration.
In addition to information on various features, functions, connections, controlling other components and how to operate this AV Receiver, inside Onkyo TX-NR1009 AV Receiver Instruction Manual, you will also find a troubleshooting that you or technician will need to overcome some minor problems you may encounter when operating the AV Receiver. Instruction manual is also mentioned that the AV receiver has dimensions of 435 x 198.5 x 435.5mm and weighs 18.5 kg.
Onkyo TX-NR1009 Receiver Product Specification
| Amplifier Section | |
| Power Output | - |
| Front L/R | 135 W + 135 W (8 ohms, 20 Hz-20 kHz, 0.08%, 2 channels driven, FTC) 160 W + 160 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC) |
| Center | 135 W (8 ohms, 20 Hz-20 kHz, 0.08%, 2 channels driven, FTC) 160 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC) |
| Surround L/R | 135 W + 135 W (8 ohms, 20 Hz-20 kHz, 0.08%, 2 channels driven, FTC) 160 W + 160 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC) |
| Surround Back L/R | 135 W + 135 W (8 ohms, 20 Hz-20 kHz, 0.08%, 2 channels driven, FTC) 160 W + 160 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC) |
| Dynamic Power | 300 W (3 ohms, 1 ch) 250 W (4 ohms, 1 ch) 150 W (8 ohms, 1 ch) |
| THD (Total Harmonic Distortion) | 0.08% (20 Hz-20 kHz, Half power) |
| Damping Factor | 60 (Front, 1 kHz, 8 ohms) |
| Input Sensitivity and Impedance | 200 mV/47 k-ohms (Line) 2.5mV/47 k-ohms (Phono MM) |
| Rated RCA Output Level and Impedance | 200 mV/2.2 k-ohms (Pre out) |
| Maximum RCA Output Level and Impedance | 4.6 V/470 ohms (Pre out) |
| Phono Overload | 70 mV (MM, 1 kHz, 0.5%) |
| Frequency Response | 5 Hz-100 kHz/+1 dB, -3 dB (Direct Mode) |
| Tone Control | ±10 dB, 50 Hz (Bass) ±10 dB, 20 kHz (Treble) |
| Signal-to-Noise Ratio | 110 dB (Line, IHF-A) 80 dB (Phono MM, IHF-A) |
| Speaker Impedance | 4 ohms–16 ohms or 6 ohms-16 ohms |
| Video Section | |
| Input Sensitivity/Output Level and Impedance | - |
| Video | 1 Vp-p/75 ohms (Component) 0.7 Vp-p/75 ohms (Component PB/CB, PR/CR) 1 Vp-p/75 ohms (Composite) |
| Component Video Frequency Response | 5 Hz–100 MHz, -3dB |
| Tuner Section | |
| Tuning Frequency Range | - |
| FM | 87.5 MHz–107.9 MHz |
| AM | 530 kHz–1,710 kHz |
| FM/AM Preset Memory | 40 stations |
| General | |
| Power Supply | AC 120 V~, 60 Hz |
| Power Consumption | 8.8 A |
| Dimensions (W x H x D) | 17 1/8" x 7 13/16" x 17 1/8" (435 x 198.5 x 435.5 mm) |
| Weight | 40.8 lbs (18.5 kg) |
If you are looking for Onkyo TX-NR1009 AV Receiver Instruction Manual, please download it from their official website that the link is below.
All information presented on this blog follow the contents from the official website or other websites (if not available on the official website) or pdf obtained at the time the information is uploaded to this blog. In this paper, there may be typographical errors. Therefore, you still have to refer to the information or specifications contained in the official website.
usermanualandspecification.blogspot.com not responsible for any changes that occur in the information contained in this user guide or specification.
usermanualandspecification.blogspot.com not received any complaints and free from any claims of any party upon the information contained in this blog.
